Price:Unfilled

Send inquiry

Size:ranging from 1/2 to 28 inches
Grades:ASTM A106 grade A,ASTM A106 B and ASTM A106 C
Length:single random length (17-24') or double random length (36 -44')
Application:used in the oil & gas, petrochemical, power generation and ship-building industries.

 

 

ASTM A106 / ASME SA106 pipes are seamless carbon steel pipes used for high temperature applications (up to 750 degrees F). These pipes are widely used in the oil & gas, petrochemical, power generation and ship-building industries (examples: refineries, downstream plants, vessels. boilers and towers). A106 pipes are particularly suited whenever the transported fluid has either high temperature or high pressure (or both combined).

ASTM A106 / SA106 pipes are available in size range from 1/2 to 28 inches, and in pipe schedules from 10 to 160. These pipes are supplied either in single random length (17-24') or double random length (36 -44').

In terms of material grades, A106 pipes are manufactured in grade A, B and C. NPS 1-1/2? and below are available in the hot finished or by cold drawn type. Pipes of NPS 2 inch and above are generally are hot rolled manufactured. A106 pipes are produced out of killed steel. The chemical composition and Machanical Property of the three grades of ASTM A106 is shown in the following table:

 

 

Chemical composition, %	Â	Â	Â	Â	Â	Â	Â	Â	Â	Â
Element	C	Mn	P	S	Si	Cr	Cu	Mo	Ni	V
max	max	max	min	max	max	max	max	max	Â	Â
A106 Grade A	0.25	0.27-0.93	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08
A106 Grade B	0.30	0.29-1.06	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08
A106 Grade C	0.35	0.29-1.06	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08

 

 

ASTM A106 pipe	Grade A	Grade B	Grade C
Tensile Strength, min., psi	48,000	60,000	70,000
Yield Strength, min., psi	30,000	35,000	40,000

 

 

The hydrotest shall apply a pressure equal to 60% of the minimum yield strength for at least 5 seconds at atmospheric conditions. The maximum pressure shall not exceed 2500 psi for pipes up to 3 inches, and 2800 for larger sizes. If additional, non standard, tests are executed the pipe shall bear an "S" mark on each length or pipe bundle.

 

 

Each length of pipe (or bundle for smaller diameters) shall have the following markings applied:

Manufacturer name

Material grade(ASTM A106 A / B / C )

Diameter and ANSI schedule (from 10 to 160 and XXS)

Pipe length

Heat number

Hydrostatic test pressure or NDE

Weight / foot

If you want to buy or import best high-quality ASTM A106 Seamless Carbon Steel Pipe, professional company, factory, seller, and exporter, please feel free to contact us.

 

https://www.yuansteelpipe.com/